There are many brands. When buying rings, it is recommended to choose some brands with high recognition, good reputation and influential brands. Rings represent commitment and loyalty to each other, so rings are important or meaningful.
Wearing a ring, for a long time there will be loose and tight, so how to wear a little tight ring?
How to measure the ring hand accurately.
If the ring is stuck on the finger, the hand can be deswollen in ice water first. After smoothing the finger with soapy water or food oil, rotate the diamond ring gradually and take it down gradually.
Method 2 If the above methods are not effective, you can ask the fire personnel to help remove the ring, so as to avoid the lack of blood supply and necrosis of the finger.
If the ring is too big, wrapping the ring dimension with red line can reduce the dimension of the ring and increase the friction between the ring and the finger, so that the ring is not easy to fall off.
Choose the ring size according to the principle of heat expansion and cold contraction. In winter, because of the cold, the finger circumference is smaller than usual, so you need to buy a little bigger when you buy.
In the summer, the finger circumference should be a little larger than usual so when buying rings, choose a smaller ring.
1. What if the ring is a little tight?
Ring with a little tight, you buy the number is not appropriate, if can’t return, can only change the finger wearing or modification to the shop to change the ring size to the difficulties, you can try to dot like hand washing soap, turn back and forth on the finger ring one or two, tell its use soap lubricating effect.
2, of course, the most convenient way is to send the ring to the shop to buy, let the professional people to help us repair, repair we also have to do a good job of ring maintenance.
Rings that are often worn should also be cleaned once a month so that they remain shiny.
Friends who like to clean themselves can squeeze toothpaste onto a cloth, rub platinum jewelry back and forth to remove fine lines and dirt on the surface of the jewelry, and then rinse with water after the usual detergent, it will be as good as new.
