Pure electric vehicles are a good development opportunity for increasing China’s auto exports, as emissions are equal for all automakers in the initial stage, and the safety and design gap between Chinese cars and foreign models is further narrowed.
From the current situation, China’s independent production of new energy vehicles will fill the entire international new energy vehicle market.
Today Xiaobian to everyone under the popularization of new energy vehicles how to open?
New energy vehicles: driving essentials in various situations should be driven slowly in the headwind.
This makes it easier to control the vehicle.
Drive slowly and at as correct an Angle as possible when approaching a kerb.
Avoid driving on objects with high, sharp edges or other road obstacles.
Failure to do so will result in serious damage to the tire, such as bursting.
Slow down when driving over bumps or on rough roads.
Otherwise, the impact will severely damage the tire and/or wheel.
Cleaning the vehicle or driving through deep water will wet the brakes.
To check if they are wet, make sure the surrounding area is safe and then gently press the brake pedal.
If normal braking force is not felt, the brake may be wet.
If the brakes are wet, it is recommended not to continue driving the vehicle until it is dry and then drive.
Before driving, make sure the parking brake is fully released and the parking brake cue light is off.
Do not put your foot on the brake pedal while driving.
This can cause dangerous overheating, wear and tear, and waste of power.
Be careful when accelerating, changing into high or low gear, or braking on slippery roads.
Sharp acceleration will cause the vehicle to skid or spin.
When the brake is wet, do not continue to run normally.
If the brakes are wet, a longer braking distance is required and the vehicle may be towed to one side while the brakes are in use.
