How to start new energy vehicles?
New energy vehicles generally refer to vehicles powered by on-board power supply and driven by motor wheels, which meet the requirements of road traffic and safety regulations;
Its working principle is: battery – current – power regulator – motor – power transmission system – drive the car driving;
The types of electric vehicles are: pure electric vehicles, hybrid electric vehicles, fuel cell vehicles.
In terms of the new energy models in the current market, our evaluation system is divided into three categories: pure electric models, plug-in hybrid models and petrol-electric hybrid models. Each category of models has its own different performance standards.
Among the many new energy vehicles, the first new energy models may be the most concerned about the situation of subsidy policy and its power range.
New energy vehicle starting steps 1, pull up the manual brake, put the clutch in neutral, check the starter switch, should be in the OFF gear.
2. The emergency starter should be placed on a smooth ground or a non-moving platform, away from the engine and belt.
3. Connect the red positive electrode clip (+) of “emergency starter” to the positive electrode of the missing battery.
And make sure the connection is strong.
4. Connect the black auxiliary machine clip (-) of “emergency starter” to the ground column of the car, and ensure that the connection is firm.
5, check the correctness and firmness of the connection.
6, start the car (not more than 5 seconds), if a start failed, please more than 5 seconds interval.
7. Remove the negative clip from the grounding column after success.
8. Remove the red positive clip of the “emergency starter” (commonly known as “Cross Jianglong”) from the positive electrode of the battery.
9. After use, please charge for 12 hours until the charging light is turned off.
The above is a small series to introduce you to the problem of how to start new energy vehicles, more please pay attention to.
