The watch is a high-end Swiss watch brand, so we must be extra careful in daily use.
The following small series for you to introduce: 1, after soaking in gasoline and washing that is, after soaking in gasoline and washing can solve the oil scale long-term savings blocking watch failure, to maintain the purpose of the watch.
2. Check the internal parts of the watch, such as the screw is found broken off, that is, the table screw driver will screw it out.
Then take out the broken screw, you can achieve the problem of dealing with the internal parts of the watch, in order to achieve the purpose of maintaining the watch.
3, clean watch oil pollution.
Shaft rotation is not flexible, oil scale long-term savings obstruction is one of the factors causing the failure of the watch, serious obstruction is solid hoop, then the hard is bound to cause a broken tooth, so it should be soaked in gasoline and washing can be solved.
A shaft in a box wheel and a box cover without axial or radial clearance is another factor of rotation inefficiency, should refer to the box wheel repair method.
4, remove the watch broken screw cap, long-term treatment will affect the performance of the watch.
Watch big steel wheel bolt broken one thousand shaft, the vast majority of large steel wheel bolt adopt positive rotation screw, foreign mechanical watches a few use rotary screw, did not make it rotate to too hard hard screw cap can occur break fall, large steel wheel screw fastening, article on watch will from period of emergence, the axis side god and cannot drive shaft wind.
Residual in the shaft of the screw, its length if exposed shaft, can be clamped broken screw, according to the direction of the screw out of it, broken screw and shaft square birch top phase at the same time, can use the tool tip respectively to live broken screw edge several places to loosen it.
Screw broken watch article just below the top of the shaft Fang Hua, thin file (commonly known as nail file) is also available at the top of the shaft Fang Chan file a groove, the corresponding residual screw also opened a screwdriver slot, and then using table screw driver to spin it out, then remove the broken screw, watch the malfunction of the internal parts can be processed in reaching problem, to increase the working life of the watch.
The latest market dynamics at any time to see, please pay attention to.
