The following are several common summer with the table easy to encounter maintenance problems: mechanical watch movement in humid air or erosion by corrosive gas and rust phenomenon, if long-term erosion by sweat or allow acid, alkali and salt dirt accumulation and not wipe off, watch will slowly appear rust, especially the rear cover is easy to appear in the concave.
Especially in the rainy summer, the most easy to repair parts of the rust and damage.
Maintenance focus: 2, quickly to rust liquid to rust.
775 ml on the speed of the solution in proportion to the mixture, you can put the mechanical watch movement parts into which can quickly remove rust.
The specific soaking time depends on the degree of rust parts.
Summer new material watch maintenance 1, in the summer before playing sports, should take off the watch.
The flexural strength and impact toughness of these high hardness materials are not as good as stainless steel.
Therefore, try to avoid hitting, hitting or falling on hard ground.
Summer strap curing belt, steel band, rubber band defects have their own advantages, you have to do is pertinence maintenance, and clocks expert how Mr Conway, kay said “summer wear leather strap watch less as far as possible, because the belt will stick on your wrist after perspiring, makes the wearer is unwell, and the sweat be soiled on leather belt is extremely difficult to clean, wear for a long time will not only produce peculiar smell,
Also can let watchband deformation, hardening and even break.
Steel watchband with sweat is easy to slip, if your watch waterproof performance in more than 50 meters, you can flush the watchband under the tap to wash sweat.
For rubber belt, afraid of water but afraid of oil, the material will gradually harden, fracture, and is an irreversible process.”
