The professional way is to remove the watchband to do cleaning, the use of ultrasonic cleaning machine, cleaning liquid is to add detergent in water, the degree of dirty, serious dirt will do a few more cleaning, and then rinse with water, electric fan drying.
Watchband is an important part of the watch, the metal watchband is the most common, from the material, and the most stainless steel watchband, in addition to: with precious metals, tungsten steel, titanium metal.
Watch because of long-term wear, watchband will bear the brunt of wear, easy to cause problems is the watchband buckle bad, screw bolt or other types of connection bolt out or off, surface scratches, gold plating, etc.
Relatively low watchband is the so-called “empty core”, relatively thin and light, is generally made of stainless steel plate bending, and the solid core watchband is relatively thick and component, watchband section and section are connected with bolts.
Tungsten steel watchband weight is larger, heavy, it is the biggest benefit of anti-wear, bad place is some of this kind of watchband prone to open welding fracture, at the same time it is more afraid of falling.
Gold or “stainless steel + gold” type of watchband, the main is afraid of abrasion scratches, but the damage can not be repaired, especially watchband buckle direction, it is easy to friction and table surface, so faster decolorization.
Friction also includes and the cuffs of the clothes, watch long-term wear, imperceptibly the coating is so worn off.
Therefore, it is recommended not to choose gold-plated watches, especially gold-plated watchband.
Moreover, the gold plating cost is very high, the plating of the gold plated watchband is very thin, the better Swiss watch, generally also plating 10 microns at most.
More wear-resistant gold plating is the so-called “vacuum ion plating”, but that is titanium plating, titanium plating is very thin, at most 1 micron, but very strong, titanium plating disadvantage is that the color does not look too “positive”.
Precious metal watchband with 18K gold is the most common, K gold color has white and yellow (white gold, yellow gold and rose gold), in addition, the most high-grade is platinum, such a table belongs to the most luxurious expensive watch.
K gold (including gold) watches are most afraid of contact with aqueous silver (mercury) chemicals, including some cosmetics and topical drugs, once touched, will immediately surface discoloration, become Wuwu coating, lose the luster of gold.
Titanium metal watchband is a better choice, titanium is relatively hard, the most important is light and not rust, the disadvantage is the color of gray hair dark is not too good.
one
How to maintain the metal watchband?
(1) the first need to regularly check the watchband section and the pin between the shell and the spring bolt, to prevent out or wear, often out, it is necessary to repair or replace in time.
(2) gold-plated watchcase watchband watch, recommended only in summer wear, or winter change the belt.
(3) tungsten steel watchband to prevent impact and excessive torque.
(4) watchband discount part is the most prone to problems, which is also related to wear, open and close when the action should be slow.
(5) K gold or gold-plated watchband, to avoid contact with aqueous silver chemicals, usually prepare sweatcloth gloves, do more surface rub.
Some white gold watchband, its surface rhodium plating, can not be polished, otherwise it will leak out of the background yellow.
two
How to clean the metal watchband?
Metal watchband wear for a long time, is relatively easy to hide dirt dirt, stored in the table joint by sweat stains and dirt mixed together dirt, looks not healthy, so, need to clean regularly.
(1) the professional way is to remove the watchband to do cleaning, the use of ultrasonic cleaning machine, cleaning liquid is to add detergent in water, the degree of dirty, serious dirt will do more than a few times to clean, and then rinse with water, electric fan drying.
(2) if you intend to do personal cleaning, it is recommended to remove the watchband to do, add the right amount of detergent in hot water, soak for 10 minutes, and then scrub with a soft toothbrush.
After the completion of rinse with water, electric fan drying.
If you intend to do your own cleaning, it is recommended to remove the watchband to do, add the right amount of detergent in hot water, soak for 10 minutes, and then scrub with a soft toothbrush.
After the completion of rinse with water, electric fan drying.
