The mechanical watch does not go mainly for the following reasons: 1, quartz watch battery without power or insufficient capacity, new battery on the line.
When the quartz watch suddenly does not go, this is the first thing we have to consider.
2, the contact is not good, most of the positive and negative pole contact reed has dirt, and the battery contact is not good.
First clean the contact surface thoroughly and then reassemble it.
3, when the quartz watch comes into contact with the magnetic field, affected by the magnetic field will stop walking.
But rest assured, quartz watch and mechanical watch is not the same, it will not be magnetized.
Just get out of the field and you’ll be fine.
4, coil break, due to oxidation or artificial reasons, the coil damage, through the multimeter test can be checked out, generally need to be replaced.
5, gear failure, this situation is because there is dust between the teeth, or foreign bodies, so that the gear teeth are stuck between each other.
Cleaning should be carried out to remove foreign matter.
6, quartz watch no output signal, other aspects have been checked, this situation is generally caused by integrated circuit board failure, in this case, you need to replace the whole integrated circuit board, this is a more serious problem.
The latest market dynamics at any time to see, please pay attention to.
