Watch the use of a long time, inevitably for a variety of reasons, make the surface of the watch rust, so it is necessary to understand the method of rust and rust removal.
Watch rust removal method.
Let’s take a look.
A desiccator is made of coarse or fine porous silica gel and a small amount of discoloration silica gel in a closed glass container.
Because the pore silica gel in 95%-100% relative humidity or directly into the solution to a large number of hygroscopic;
But the fine pore silica gel even in the low relative humidity, still has a high moisture absorption ability.
Such mixed use can meet the requirements of storage.
Apply a small amount of Vaseline to the interface of the dryer and press to seal tightly.
The lid should be opened at least to extend the service life of silica gel.
General discoloration silica gel red, should be dried regeneration or new, in addition to the movement of serious or slightly oxidized oil scale, can be used before cleaning brush brush.
Anti-rust paper packaging parts, can use multi-effect anti-rust paper, suitable for steel, copper parts and steel, copper movement parts combination of parts.
Rust – proof paper coated with wax (moisture – proof) inside coated with gas – phase rust – proof.
The parts were immersed in washing oil supplemented with 5%901 antirust oil, and rough-washed and carefully washed with a brush (the washing oil can be prepared with industrial gasoline or kerosene for lamps, and the oil seal can be dipped, brushed and sprayed at room temperature.
For the use of mechanical watches, especially non-sealed mechanical watches and exposed mechanical watch movement parts, into the water vapor is not timely dry thousands, resulting in the rust of the core parts.
Parts rust.
Damage to the surface quality, so that the table machine can not work properly, resulting in inaccurate watch time, serious and even damage parts.
In the repair, rust parts can be placed in the gasoline bubble for a period of time, the brown red or green oxide bubble down, but the time is slower, not completely.
A rapid rust removal solution was introduced. The specific formula was as follows: 75 ml triethanolamine, 25 ml water, distilled water (H,0).
775 ml of the solution in proportion to the mixture, you can put the mechanical watch movement parts into which can quickly remove rust.
The specific soaking time depends on the degree of rust parts.
The above is a small series for you to introduce the watch rust removal method of the problem, more knowledge please pay attention to.
