Although the mechanical watch has no battery, but some simple and easy maintenance is very necessary, which is very helpful to extend the service life of the watch and maintain a good movement.
So how to maintain the mechanical watch?
Next, some mechanical maintenance methods.
It is recommended that every 1 to 2 years should do the corresponding maintenance, replacement of components, detection of travel time performance and movement power consumption, cleaning movement and maintenance appearance.
Such maintenance services will effectively extend the use of your mechanical watch time.
Wear mechanical watch, hand sweat is corrosive to the case, the steel case due to nickel chromium alloy, corrosion resistance is better, half steel case is copper, long-term contact with sweat, easy to corrosion, should often use a soft cloth to wipe sweat or pad plastic table support, in order to prevent it from being sweat erosion.
Do not open the back cover of the table at will, so as not to affect the normal work of the mechanical table into the dust movement.
Do not put the mechanical table in the wardrobe with mothballs, so as not to spoil the table oil.
Do not put the mechanical watch on the power amplifier, stereo, television, so as not to magnetize.
Long-term storage does not wear the mechanical watch, should be regularly wound once a month, automatic movement of the mechanical watch should gently swing back and forth for a few minutes or wear on the wrist for a period of time to make it automatically wound.
Make the parts not in the static state for a long time, in order to ensure the running performance of the table machine.
Ordinary mechanical table by the tide, available dry cotton pressure on the mechanical table, then bake with a 40 watt light bulb for 5 minutes, the moisture in the table can be all evaporated.
If the quartz electronic watch by the tide, some small pieces of calcium chloride, wrapped with gauze;
Then open the cover of the electronic table, the packed calcium chloride and electronic table together into an airtight plastic bag or glass bottle, sealed.
Generally about 3 hours can be in addition to the tide, so that the electronic table back to normal.
For serious damp table can be properly extended moisture absorption time.
Put the mechanical watch on the wrist to sleep, if the mechanical watch is luminous watch, it will bring adverse effects to the body.
This is because luminous table pointer and dial coated luminescent materials, mainly a mixture of radium and zinc sulfide, radium emit rays can stimulate zinc sulfide crystal luminescence, sleep, if wearing a table, the human body will be eight to nine hours of radium radiation, there is a certain harm to the human body.
Therefore, before going to bed, it is best to take down the luminous watch and put it on the table.
The table has been renovated.
After the mechanical table has been marked out a lot of lines, you can drop one or two drops of water on the table, and then squeeze a little toothpaste wipe, you can remove the lines and make the table as new.
The above is a small series for you to introduce the maintenance method of mechanical table problems, more knowledge please pay attention to.
