As a famous watch brand, by the majority of watch lovers love.
Then as a watch, it is also a consumable, it is very normal to have a variety of problems in the process of use, watch stop is one of them.
What is the reason for the watch to stop?
How to deal with when the watch stops?
The following small series for the “stop and go” this problem specific analysis.
Longines watch does not go what is the reason for 1, man-made Longines watch does not go, most because of improper wear, resulting in the watch fell to the ground or was caused by a violent impact table parts damage, such as this case, watch maintenance needs to open the watch, see is the part damaged, and then replace the new parts.
Of course, the most important thing is that mechanical watches are wound, and we must first make sure that the watch is powered.
2, natural wear and tear caused by Longines watch does not walk, most is the watch battery is out of power or the table oil sludge dry block watch walk, watch if this leads to, maintenance watch only need to change a new battery or to watch the movement parts to rub oil once can be good.
1, the wrong way to repair the mechanical table does not go many people have encountered, some people may be used to take a few table, some may shake a few, in fact, these are the wrong approach.
Mechanical watches are generally composed of hundreds of thousands of parts, the internal parts are very sophisticated and complex, some parts magnified several times also only the size of the hair, so to take the watch, or shake when it may damage the internal parts of the mechanical watch.
2, the use of fully automatic watches some people may buy a fully automatic mechanical watch, think that since it is fully automatic sure is not need to tube, in fact, this is a mistake.
Automatic mechanical watch, by automatic to any direction of rotation can be wound up automatically on the function of the mechanism running (visible in the transparent bottom table cover table).
It can be imagined that only the watch is worn on the hand, with the arm movement, the automatic tuo also rotates to generate energy.
General automatic watches should be worn on the hand for more than 8 hours a day to make up the amount of spring, but not absolutely.
Now is generally office work, watch often stop phenomenon, in addition to the movement, because the wearer’s lack of exercise, can not give enough energy to the spring, such as this reason, can be used to wind up the method to make up.
The wrong method of use will shorten the life of the table, as a love table, we should master the right way to protect the watch, make the table get better care.
